Drying Temperature; Dryness Level - Frigidaire Dryer Servicing

Affinity Series

Drying Temperature

For best results, follow fabric care label instructions on
items to be dried. To change the drying temperature,
press the TEMPERATURE button to scroll to the desired
heat. To protect your wardrobe, not all temperatures
are available with every cycle. (See Figure 3-3)
Maximum heat is recommended for sturdy fabrics.
High heat is recommended for most cotton fabrics.
Medium heat is recommended for wrinkle free,
permanent press and lightweight fabrics.
Low heat is recommended for delicate fabrics.
Air Fluff/No Heat should only be used with a Timed
Dry setting to dry items containing feathers, down,
foam rubber, plastics or rubber-like materials; to freshen
clothing, pillows or blankets; or to dust draperies.
NOTE
Using Air Fluff/No Heat in any Auto Dry cycle will
result in long drying times and/or wet loads at the end
of the cycle.

Dryness Level

To change the dryness level, press the DRYNESS button
until the desired selection is made. Select Normal for
most loads. (See Figure 3-4)
Occasionally a load may seem too damp or over-dried
at the end of the cycle. To increase drying time for
similar loads in the future, select More Dry. For loads
requiring less drying time, select Less Dry.
Select Damp Dry for items you wish to partially dry
before hanging or ironing.
NOTE
To prevent over-drying, not every dryness level is avail-
able with every cycle.
Section 3 Electronic Control
Maximum Temperature
Selected
Press
Here
Figure 3-3. Drying Temperature
Figure 3-4. Dryness Level
More Dry
Selected
Press Here
3-3