Cycle Adjustments; Drying Temperature; Dryness Level; Dryer Features - Frigidaire FEFB9200ES0 Operating Instructions Manual

Cycle Selection (Con't)
Bulky
Select this cycle to dry a comforter, blanket, sleep-
ing bag or similar item.Cool Down is approximately
10 minutes.
Timed Dry
To manually select the drying time for any load,
turn the knob to a numbered setting. Drying times
from 15 to 90 minutes are available in 15-minute
increments. You will not be able to select a cycle
or dryness level. Timed Dry is recommended when
using the No Heat option.
Note: To change cycles, press PAUSE/CANCEL
twice.
To avoid fire hazard, do not use heat
to dry items containing feathers or down, foam rub-
ber, plastic, or similarly textured, rubber-like mate-
rials. Use the No Heat setting only.

Cycle Adjustments

A suitable combination of drying temperature,
dryness level and options will automatically be
displayed for each cycle. The settings can be
changed before the cycle is started. Those
adjustments will automatically be remembered each
time that cycle is selected. If a temperature, dry-
ness level or option is not recommened for a cycle,
the indicator will not light. See the "Dryer Settings
Chart" for more details.
If changes are attempted after the cycle starts, the
status lights will blink and the signal will beep 3
times. The cycle must be paused before the set-
tings can be changed. Press PAUSE/CANCEL
once to pause the cycle and change settings.

Drying Temperature

For best results, follow the fabric care label
instructions on items to be dried. To change the
drying temperature, press TEMP to scroll to the
desired heat. To protect your wardrobe, not all tem-
peratures are available with every cycle.
High heat is recommended for sturdy fabrics.
Medium High heat is recommended for most cot-
ton fabrics.
Medium heat is recommended for wrinkle free, per-
manent press and lightweight fabrics.
Low heat is recommended for delicate fabrics.
No Heat should only be used with a Timed Dry
setting to dry items containing feathers, down, foam
rubber, plastics or rubber-like materials; to freshen
clothing, pillows or blankets; or to dust draperies.
Note: Using No Heat in any Auto Dry cycle
will result in long drying times and /or wet
loads at the end of the cycle.

Dryness Level

To change the dryness level, press DRYNESS un-
til the desired selection is made. Select Normal
for most loads.
Occasionally a load may seem too damp or over-
dried at the end of the cycle. To increase drying
time for similar loads in the future, select More
Dry. For loads requiring less drying time, select
Less Dry.
Select Damp Dry for items you wish to partially
dry before hanging or ironing.
Note: To prevent over-drying, not every
dryness level is available with every cycle.
Options
To select an option, press OPTIONS until the indi-
cator for the desired option flashes, then press SE-
LECT. If an option is not available for a cycle, the
indicator will not light. Follow the same steps to
delete an option.
The Cycle Signal will sound at the end of the cycle
and periodically during Press Saver.
Select Shrink Guard to lower the initial drying
temperature to protect fabrics from overdrying.
Select Press Saver if the dried load might not be
removed promptly at the end of the cycle. The dry
load will continue tumbling without heat for 30 min-
utes to help reduce wrinkling. When the Cycle
Signal is selected, a beep will be heard periodi-
cally. The load may be removed any time during
Press Saver.

Dryer Features

Control
To avoid having someone accidentally start or stop
the dryer, press OPTIONS and SELECT at the same
time until the Control indicator is lighted. To
remove the control lock, press OPTIONS and SE-
LECT again.
Status Lights
The following indicators may be lighted during the
cycle:
• Drying
• Cool Down
• Press Saver
• Clean Lint Filter
• Control
PN 134431300A (0501)