Options; Dryer Features - Frigidaire Dryer Servicing

Gallery Series

Options

To select an option, press OPTIONS until the indicator
for the desired option flashes, then press SELECT. If an
option is not available for a cycle, the indicator will not
light. Follow the same steps to delete an option.
(See Figure 3-5)
The Cycle Signal will sound at the end of the cycle
and periodically during Press Saver.
Select SHRINK GUARD to lower initial drying temperature
to protect fabrics from over-drying.
Select Press Saver if the dried load might not be
removed promptly at the end of the cycle. The dry load
will continue tumbling without heat for 30 minutes to
help reduce wrinkling. When Cycle Signal is selected,
a beep will be heard periodically. The load may be
removed any time during Press Saver.

Dryer Features

Control Lock
To avoid having someone accidentally start or stop the
dryer, press OPTIONS and SELECT at the same time
until the Control Lock indicator is lit. To remove the
control lock, press OPTIONS and SELECT again.
(See Figure 3-6)
Start/Pause
Press START/PAUSE to start, pause or restart a cycle.
"PAU" will be displayed alternately with the estimated
time remaining when the cycle is paused.
Cancel
Press CANCEL to stop the cycle.
Status Lights
The following indicators may be lighted during the cycle:
• Drying
• Cool Down
• Press Saver
• Clean Lint Filter
• Control
Section 3 Electronic Control
Shrink Guard Selected
Press Here To Scroll
Figure 3-11. Options
Press Here To Lock Control
Figure 3-12 . Dryer Features
Press Here To Select
Control Lock
Indicator
3-11