Optical Path Switching - Nikon ECLIPSE TE2000-E Instructions Manual

III. Operation of each part

3. Optical path switching

Use the "optical path switchover dial" to send the image to each port. (See page 51 for the type of the photomicrography
equipment that each port can accept.)
For TE2000-E
Connect the T-RCP remote control pad or PC to the T-HUBC HUB controller for the switching of the optical path. For details,
refer to the instruction manual supplied with the T-HUBC HUB controller.
When using the T-RCP remote control pad
For TE2000-U
*1: Dial position "3" cannot be used on
normal microscope models; however,
an optional prism such as "front port
100%" and "right-side port 100%" can
be installed.
40
Observation port
Observation port
Right-side port
Observation port
Front port
Bottom port
Left-side port
The LED above the selected key lights.
Position of Light distribution(％ ％ ％ ％ )
optical path
Observation
switchover
port
dial
1 100
2 20
3 (*1) -
4 20
5 -
Eyepiece tube
Intermediate
SLR camera
Equipment
Tube
that can be
+
attached to
trinocular
the port
digital camera
eyepiece tube
(+ various
equipment)
100
20
80
20
80
100
100
Front
Right-side Left-side
port port
port
- -
- 80
- -
80 -
- - 100
Photomicro-
Photomicro-
graphy
graphy
equipment
equipment
for
for
microscopes
microscopes
F-mount
Digital camera
Digital camera
TV camera
TV camera
-
-
-
-