Table of Contents
Advertisement
Required tools:
2mm hexagonal screwdriver x2 (supplied)
4mm hexagonal wrench x1 (supplied)
Installation location:
Refer to the "Notes on handling the microscope" on the top of this manual and select an
appropriate location.
Combination of "T-DH dia-illuminator 100W"
and "system condenser"
Condenser
turret
Condenser
module
Condenser
lens
Stage
6
Eyepiece
2
Eyepiece
tube
Main body (base)
1
Checking the power supply voltage
Make sure that the input voltage indicated on your power supply corresponds with the voltage of the
commercial power supply in your area. If the two values do not match, do not use the power supply, and
contact your nearest Nikon representative immediately. Use of a power supply with a different input
voltage indication can result in electric shock, fire, malfunction, and/or other accidents.
1. Setting the main body (base)
Take out the microscope base from the box and settle it on a stable desk.
The base is heavy. Hold it securely by the dent at the lower front and the carrying handle at the rear.
Filter
Lamphouse
slider
5
8
Dia-
Lamp
illuminator
4 -2
Condenser
holder
4 -1
Objective
Revolving
4
nosepiece
3
9
Power supply
Combination of "T-DS dia-illuminator 30W"
and "ELWD-S condenser"
Filter
slider
7
Dia-
illuminator
8
Condenser
holder
Condenser
To wall outlet
IV. Assembly
Lamp
7
5
4
55
Hide quick links:
Advertisement
Table of Contents
