Operation Of Each Part - Nikon ECLIPSE TE2000-E Instructions Manual

III. Operation of each part
In this chapter, operation of each part is described.
• Refer to "II. Microscopy" for the procedures on microscopy.
• If your microscope is not assembled yet, see "IV. Assembly" first.
• If you have mounted the Epi-fl or DIC attachment on the microscope, also refer to the instruction manual
supplied with the attachments.
• Also refer to "I. Parts of the microscope and their names" for simple description of each part.
• If you are using the TE2000-E model, read the instruction manual supplied with the T-HUBC
HUB controller.
• When the T-HUBC HUB controller is mounted on the rear side of the microscope, read the
instruction manual supplied with the HUB controller.
Before using the instrument, read the "
microscope" at the beginning of this manual and be sure to follow the warnings and cautions written
therein.
Also refer to the instruction manual supplied with the other instruments used together with the
microscope (such as Epi-fl or DIC attachments) and be sure to follow the warnings and cautions
written therein.
III. Operation of each part
", " " and "Notes on handling the
37