Burst Of Steam In Vertical Position - Russell Hobbs 12290 Instructions And Warranty


The iron is now ready for use.

Press the Burst of Steam Button.

Steam will penetrate into the garment removing the wrinkles.

Wait for a few seconds before pressing the Burst of Steam Button again when
there are stubborn wrinkles.

NOTE: It may be necessary to press the burst of steam button a few times to
start this function.

For optimum steam quality, do not operate the Burst Of Steam more than three
times in succession

BURST OF STEAM in VERTICAL POSITION

Warning: Do not apply steam on any clothes or fabrics that are being worn by human or
pets. Temperature of steam is very high.

This function provides extra amount of steam to remove wrinkles on delicate
garments in a hanging position, hanging curtains, or other hanging fabrics.

Fill the iron as described in the section of How to Fill Water.

Connect the iron to a suitable mains supply outlet; pilot light will glow for a
second then switch off.

Turn the Temperature Dial to „

Pilot light will glow to indicate the iron is heating up or cooling down.

Pilot light goes off when the required temperature has been reached.

The iron is now ready for use.

Hold the iron between 15 to 30 centimeters away from the garment.

Press the Burst of Steam Button once

Steam will penetrate into the garment removing the wrinkles.

Wait for a few seconds before pressing the Burst of Steam Button again.

NOTE: It may be necessary to press the burst of steam button a few times to
start this function. For optimum steam quality, do not operate the Burst of Steam
more than three times in succession.
'
(3-dot)‟ or 'MAX' position.
8
FIGURE 7