Built In Anti-Scale System; Auto Shut Off Function; Cleaning And Maintenance - Russell Hobbs 12290 Instructions And Warranty

ANTI-DRIP

Anti-drip system, which is designed to prevent water escaping from the
soleplate when the iron is too cold automatically.

During use, the anti-drip system may emit a loud clicking sound, particularly
during heat-up or whilst cooling down. This is perfectly normal and indicates
that the system is functioning correctly.

BUILT IN ANTI-SCALE SYSTEM


The built-in anti-scale cartridge is designed to reduce the build-up of lime scale
which occurs during steam ironing. This will prolong the working life of your iron

NOTE: The anti-scale cartridge will not completely stop the natural process of
lime scale build-up.

AUTO SHUT OFF FUNCTION:

The Auto shut-off feature will operate automatically when the iron is unattended but is
still connected to the mains supply outlet.
 Auto shut-off in horizontal
o The iron will switch off automatically at around 30 seconds if the iron is
immobile in the ironing position (horizontal).
o Pilot light blinks, indicating the iron is in Auto-Off mode
o
Simply moving the iron, will switch the iron ON again.
 Auto shut-off in vertical
o The iron will switch off automatically at around 8 minutes if the iron is left on
its heel rest position(vertically).
o Pilot light blinks, indicating that the iron is in Auto-Off mode
o Simply moving the iron, will switch the iron back ON.
o
NOTE: The iron will take about 60 seconds to reach its previous soleplate
temperature.

CLEANING AND MAINTENANCE


This appliance is for household use only and is not user-serviceable.

Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
10
FIGURE 8