Russell Hobbs 14995 Instructions Manual

Russell Hobbs 14995 Instructions Manual

Iron

Advertisement

Quick Links

instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 14995 and is the answer not in the manual?

Questions and answers

Summary of Contents for Russell Hobbs 14995

  • Page 1 instructions...
  • Page 2: Important Safeguards

    Read the instructions and keep them safe. If you pass the iron on, pass on the instructions too. Remove all packaging, but keep it till you know the iron works. important safeguards Follow basic safety precautions, including: 1 This iron must only be used by or under the supervision of a responsible adult. Use and store it out of reach of children.
  • Page 3: Before Using For The First Time

    13 Sit the iron upright when you’re not ironing, and when you store it away. 14 Leave the iron upright to cool before cleaning. 15 Unplug the iron when not in use, before moving and before cleaning. Let it cool down fully before cleaning and storing away.
  • Page 4: Steam Ironing

    temperature setting guide label marking temperature dot setting j cool – nylon, acrylics, polyester • k warm – wool, polyester mixtures • • l hot – cotton, linen • • •/max i do not iron , If the instructions on the fabric label differ from this guide, follow the instructions on the label.
  • Page 5: Dry Ironing

    dry ironing 36 If you’re going to be dry ironing for 20 minutes or more, empty the reservoir first, to avoid spontaneous bursts of steam. 37 Move the steam control to S. 38 Wait till the thermostat light goes out, then start ironing. vertical steaming 39 Remove wrinkles from hanging clothes, hanging curtains, and furnishing fabrics.
  • Page 6 66 When the reservoir is empty, release the self clean button. 67 Unplug the iron, and sit it on its heel to cool. 68 When it’s cold, wipe off any moisture. 69 Store the iron on its heel, to avoid corrosion and damage to the soleplate. anti-scale 70 The anti-scale agent incorporated in the iron helps prevent the build-up of scale.
  • Page 8 connection The product must be earthed. It has a 13A BS1362 fuse in a 13A BS1363 plug. To replace the plug, fit the green/yellow wire to E or E, the blue wire to N, and the brown wire to L. Fit the cord grip. If in doubt, call an electrician.

Table of Contents