Russell Hobbs 14546 Instructions Manual
Russell Hobbs 14546 Instructions Manual

Russell Hobbs 14546 Instructions Manual

Ocean 2200w easyfill iron

Advertisement

Quick Links

instructions

Advertisement

Table of Contents
loading

Summary of Contents for Russell Hobbs 14546

  • Page 1 instructions...
  • Page 2: Important Safeguards

    Read the instructions and keep them safe. If you pass the iron on, pass on the instructions too. Remove all packaging, but keep it till you know the iron works. important safeguards Follow basic safety precautions, including: 1 This iron must only be used by or under the supervision of a responsible adult. Use and store it out of reach of children.
  • Page 3: Temperature Setting Guide

    18 The iron has a protective thermal fuse, which will blow if it overheats. If this happens, the iron will stop working, and must be returned for repair. 19 Don’t use the iron if it’s dropped or damaged, or if it malfunctions or leaks. 20 If the cable is damaged, return the iron, to avoid hazard.
  • Page 4: Steam Ironing

    reducing temperature 20 Reducing the temperature takes a bit longer, as the element has to lose the heat it has built up, so be patient. It’s best to organise your ironing so that you don’t need to reduce the temperature (“preparation” page 3, point 2). steam ironing 21 When steam ironing, you must set the temperature control to S or higher.
  • Page 5: Vertical Steaming

    vertical steaming 40 Remove wrinkles from hanging clothes, hanging curtains, and furnishing fabrics. 41 Check that there’s adequate ventilation behind the fabric, otherwise moisture may build up, causing mildew. 42 Check that there’s nothing behind the fabric that may be damaged by the steam.
  • Page 6 70 Sit the iron on its heel to cool. 71 When it’s cold, wipe off any moisture, and wind the cable round the heel. 72 Store the iron on its heel, to avoid corrosion and damage to the soleplate. anti-scale 73 The anti-scale agent incorporated in the iron helps prevent the build-up of scale.
  • Page 8: Connection

    connection The product must be earthed. It has a 13A BS1362 fuse in a 13A BS1363 plug. To replace the plug, fit the green/yellow wire to E or E, the blue wire to N, and the brown wire to L. Fit the cord grip. If in doubt, call an electrician.

Table of Contents