Russell Hobbs 14033 Instructions Manual
Russell Hobbs 14033 Instructions Manual

Russell Hobbs 14033 Instructions Manual

Steamglide travel iron

Advertisement

Quick Links

instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 14033 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Russell Hobbs 14033

  • Page 1 instructions...
  • Page 2: Important Safeguards

    Read the instructions and keep them safe. If you pass the iron on, pass on the instructions too. Remove all packaging, but keep it till you know the iron works. important safeguards Follow basic safety precautions, including: 1 This appliance must only be used by or under the supervision of a responsible adult. 2 Don’t put the appliance in liquid, don’t use it in a bathroom, near water, or outdoors.
  • Page 3 13 Unplug the appliance when not in use, before moving and before cleaning. Let it cool down fully before cleaning and storing away. 14 Don’t fit any attachment or accessory other than those we supply. 15 Keep the iron and the cable away from hotplates, hobs or burners. 16 Don’t use the iron for any purpose other than those described in these instructions.
  • Page 4: Steam Ironing

    power up 17 Set the iron upright, with the rests at either side of the rear of the iron, and the end of the handle, on a stable, level, heat- resistant surface, preferably an ironing board 18 Put the plug into the wall socket (switch the socket on, if it’s switchable).
  • Page 5 after use 32 Turn the temperature control to •. 33 Turn the steam control to S. 34 Unplug the iron from the wall socket (switch the socket off first, if it’s switchable). 33 Sit it upright, and leave it to cool down completely. 34 When it’s cool, turn the iron upside down over a sink or basin, and empty the reservoir.
  • Page 8 connection The product must be earthed. It has a 13A BS1362 fuse in a 13A BS1363 plug. To replace the plug, fit the green/yellow wire to E or E, the blue wire to N, and the brown wire to L. Fit the cord grip. If in doubt, call an electrician.

Table of Contents