Function Settings (Func) - Coemar Infinity Wash XL Instruction Manual

8.3. Function settings (FUNC)

The projector allows the altering of several functions and for selecting personalised settings.
AOO1
menu
FUNC
enter
PDIR
+ o –
pan movement inversion
To reverse horizontal movement direction of the beam
on DMX level variation.
TDIR
+ o –
tilt an movement inversion
To reverse vertical movement direction of the beam on
DMX level variation.
OPTO
+ o –
optic sensor de-activation
To deactivate the optic sensor function with return inpo-
sition of the unit if accidentally knocked out of the place.
LAMP
+ o –
Lamp control
To disable on/off control of the lamp by DMX signal.
FANS
+ o –
fans control
Fan status control through PCB (Strd) or fans always on
(On).
DISP
+ o –
reverse display
To reverse the display reading depending on mounting
position (base or suspended).
LED
+ o – display control
To disable display visualisation.
RESE
+ o –
reset
Reset function
OFSE
+ o –
default function setting
To set all the functions at the original values, but for the
alignement operations.
DEMO
+ o –
demo program
To see all the unit function
PAN
+ o –
pan control
reduce rotation angle from 530° to 400°.
X.Y
+ o –
Pan e Tilt setting
Function without pan/tilt
Z A P . E
+ o –
zap effect
Zap effect
I D
+ o –
ID number setting
To set the unit's ID number from 0 (no ID, to 250)
8.4. Rapid scrolling
Via the Infinity Wash XL display it is possible to rapidly scroll through the various numbers displayed in the menu in the following manner:
1. Pressing the + or - buttons will cause the number to scroll more quickly.
2. Pressing and holding the + button and then the - button will cause the numbers to jump to the highest value.
3. Pressing and holding the - button and then the + button will cause the numbers to jump to the lowest value.
C W
enter + o –
enter
clockwise
C C W
+ o –
enter
Counter-clockwise
C W
enter + o –
enter
clockwise
C C W
+ o –
enter
Counter-clockwise
O N
enter + o –
enter
sensor activation
O F F
+ o –
enter
sensor deactivation
STRD
enter
+ o – enter
switching on through DMX 512
O N
+ o –
enter
lamp always on
S T R D
enter + o –
enter
fan speed control
O N
+ o –
enter
fan always on
A A
enter + o –
enter
base downwards
+ o –
enter
base upwards
O N
enter + o –
enter
display actived
A U T O
+ o –
enter
display switch off after 6 second
-– -– -– -–
enter
reset activation
S U R E
enter
enter
D E M O
enter
( flashing)
demo program activation
5 4 0
enter enter
+ o –
pan 540°
4 0 0
enter
+ o –
pan 400°
O N
enter
enter + o –
Pan/Tilt active
O F F
+ o – enter
Pan/Tilt inactive
O N
enter + o – enter
zap on
O F F
+ o – enter
zap off
1 - - 2 5 0
enter + o–
numeric value
17
English