Table of Contents
Advertisement
Object
Server IP Address
User Name
Password
Wan Type
Connection Type
Idle Time
MTU Size
Enter the L2TP Server IP address in dotted-decimal notation provided by
your ISP.
Enter the User Name provided by your ISP. This field is case-sensitive.
Enter the Password provided by your ISP. This field is case-sensitive.
Select the corresponding method to obtain an IP address from your ISP.
IP Address
Enter the IP address in dotted-decimal notation provided
by your ISP.
Subnet Mask
Enter the subnet mask in dotted-decimal notation
provided by your ISP.
Gateway
Enter the gateway IP address in dotted-decimal notation
provided by your ISP.
Enter the DNS server IP address provided by your ISP,
DNS1
or you can specify your preferred DNS server IP
address.
DNS2
You can enter the IP address of another DNS server as
a backup. DNS 2 server will be used when the DNS 1
server fails.
Select the connection type Continuous, Connect on Demand or Manual
from the drop-down menu. If selecting Manual, the user can click Connect
button to make a connection.
It represents that the device will idle after the minutes you set. The time
must be set between 1~1000 minutes. Default value of idle time is 5
minutes. This function will be available when the Connection Type is
selected to Connect on Demand.
The default MTU (Maximum Transmission Unit) value is 1460 Bytes. It is
not recommended that you change the default MTU Size unless required
by your ISP.
Table 4-13
-44-
User's Manual of WNRT-320GS
Description
Advertisement
Table of Contents
