Planet WNRT-320GS User Manual page 41

Object
IP Address
Subnet Mask
Default Gateway
DHCP
DHCP Client Range
Static DHCP
Domain Name
802.1d Spanning Tree
Clone MAC Address
Figure 4-18 LAN Interface
The LAN IP address of the WNRT-320GS, and default is 192.168.1.1.
You can change it according to your request.
Default is 255.255.255.0. You can change it according to your request.
Default is 0.0.0.0. You can change it according to your request.
You can select one of Disable, Client, and Server. Default is Server,
that the WNRT-320GS can assign IP addresses to the computers
automatically.
For the Server mode, you must enter the DHCP client IP address
range in the field. And you can click the "Show Client" button to show
the Active DHCP Client Table.
Click the "Set Static DHCP" button, and you can reserve some IP
addresses for those network devices with the specified MAC
addresses anytime when they request IP addresses.
Default is Router.
You can enable or disable the spanning tree function.
You can input a MAC address here for using clone function.
Table 4-7
-35-
User's Manual of WNRT-320GS
Description