Table of Contents
Advertisement
Object
WAN Access Type
Attain DNS Automatically
Set DNS Manually
Clone MAC Address
Enable uPNP
Enable IGMP Proxy
Enable Ping Access on WAN
Enable Web Server Access
on WAN
Enable IPsec pass through
on VPN connection
Enable PPTP pass through
on VPN connection
Enable L2TP pass through on
VPN connection
Enable IPv6 pass through on
VPN connection
USB3G
The connection that requires the correct
parameters to obtain an IP address from 3G
mobile network.
The connection which uses the dynamic IP
DHCP Client
address assignment.
The connection that requires a username and
PPPoE
password.
The connection which uses the static IP address
Static IP
assignment.
The connection which uses a Point-to-Point
PPTP
Tunneling Protocol (PPTP) connection.
The connection which uses a Layer2 Tunneling
L2TP
Protocol (L2TP) connection.
Choose to attain DNS automatically from your ISP.
Choose to specify your preferred DNS Server IP address. The
DNS 2 and DNS 3 are optional. You can enter the IP addresses
of the secondary and the third DNS Servers as alternatives of
DNS 1.
You can input a MAC address here for using clone function.
Check the box to enable the uPNP function. The uPNP devices
can be automatically discovered by the uPNP service application
on the LAN.
Check the box to enable the IGMP Proxy function.
Check the box to enable Ping access from the Internet Network.
Check the box to enable the web server access of the
WNRT-320GS from the Internet network.
Check the box to enable IPsec pass through function on VPN
connection.
Check the box to enable PPTP pass through function on VPN
connection.
Check the box to enable L2TP pass through function on VPN
connection.
Check the box to enable IPv6 pass through function on VPN
connection.
Table 4-8
-37-
User's Manual of WNRT-320GS
Description
Advertisement
Table of Contents
