Manual Operation - Wascomat WS3 230-340-470-670 H Instruction Handbook Manual

INSTRUCTION
HANDBOOK

Manual operation

To select manual operation
RUN A WASH PROGRAM
GO TO THE MENU
3589
RUN A WASH PROGRAM
GO TO THE MENU
MENU
MAKE A CHOICE :
WASH PROGRAM LIBRARY
PROGRAMMING MODE
SETTINGS 1
MEMORY CARD
SERVICE MODE
STATISTICS
3685
WASH PROGRAM LIBRARY
PROGRAMMING MODE
SETTINGS 1
MEMORY CARD
SERVICE MODE
STATISTICS
MANUAL MODE
SETTINGS 2
EXIT
11. Machine
operation
If this menu is not currently
displayed :
Press repeatedly.
Press ò to highlight « GO
TO THE MENU ».
Press SELECT.
Press ò six times...
... to highlight "MANUAL
MODE".
Press SELECT.
01201055
Notice
Two types of manual operation
There are two types of manual operation, which
should not be confused :
•
Manual operation when no program is running
These functions are described in this section.
•
Manual operation during a program
These functions are described in section "Manual
operation".
Always lock the door first !
You must always close and lock the door first before
you can operate the machine manually.
To lock the door, use the submenu MOTOR/DOOR,
see section "Motor/door".
All manual settings are cancelled when you
exit manual operation
All manual settings (such as door, motor, temperature,
and drain) will be cancelled when you exit manual
operation.
The door is unlocked, the motor stops, the drain
opens, heating is halted, and the temperature is reset
to zero.
0999 28
11
Date Page