Related Manuals for Wascomat H7-75
Summary of Contents for Wascomat H7-75
- Page 1 User manual Washer extractor H7–75, H7–105, H7–130, H7–180, H7–240, H7–300 Type W3... 438909643/GB, IE Original instructions 2022.11.14...
-
Page 3: Table Of Contents
Contents Contents 1 Safety Precautions ..........................5 General safety information......................6 Commercial use only........................6 Symbols............................6 2 Program description ..........................7 General.............................7 Program description ........................7 3 Handling .............................9 Load ............................9 Detergent ..........................9 How to start the machine ......................10 3.3.1 General, OPL.........................10 3.3.2 Coin operated machines ....................10 Additional functions........................ -
Page 5: Safety Precautions
User manual 1 Safety Precautions • Servicing shall be carried out only by authorized personnel. • Only authorized spare parts, accessories and consumables shall be used. • Only use detergent intended for water-wash of textiles. Never use dry cleaning agents. •... -
Page 6: General Safety Information
User manual • Additional requirements for other countries: – This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. -
Page 7: Program Description
— different segments use different programs. The following program description is a short description of some exam- ples of programs that can be used. For a complete and detailed information about all the available wash programs, please refer to Wascomat web-site. It is recommended to follow the care labelling of the garment as far as possible. - Page 8 User manual The following table shows some examples of available programs used on coin operated machines and a short de- scription of those: Program Description Cotton and terry. COLD 40°C. For an optimal result, full load is recommended. WARM Cotton and terry. 60°C.
-
Page 9: Handling
User manual 3 Handling 3.1 Load Load the goods into the machine according to recommendations and close the door. Maximum load H7–75 8 kg H7–105 11 kg H7–130 14 kg H7–180 20 kg H7–240 27 kg H7–300 33 kg 3.2 Detergent Add the correct amount of detergent, bleach and softener according to recommendations. -
Page 10: How To Start The Machine
User manual 3.3 How to start the machine This manual cover different types of machine models. Check the panel on your machine and follow the description for your type of machine. 3.3.1 General, OPL Select program by turning the control knob. Example of programs NORMAL Different temperatures can be selected. -
Page 11: Additional Functions
User manual 3.4 Additional functions There is a menu with additional functions available for selection after start. When pressing the control knob / start but- ton (on machines without control knob) the menu will appear on the display. Select from the menu by turning the control knob / pressing the temperature button/-s and press the control knob / start button to activate. -
Page 12: When Program Has Ended
User manual Auto restarts Select AUTO RESTARTS and activate. Set the number of automatic restarts that the machine will perform of the selected program. Press the control knob / start button to confirm the settings. 3.5 When program has ended Leave the door open when ready. -
Page 13: Timer
User manual 4 Timer The timer is used to start a part of the program (for example the last rinse of the udder cloth program) after pause on a pre-set time. The time can be set for all days or for selected days. To program the timer you need to activate the machines service mode. -
Page 14: Error Codes
User manual 5 Error codes A fault in the program or in the machine is indicated by an error code on the display. Some of these error codes can be solved easily without contacting service personnel. Error Text Cause/Action code 11:1 NO WATER Water level acknowledgement not reached in time. -
Page 15: Maintenance
User manual 6 Maintenance 6.1 General It is the responsibility of the owner of the machine/the laundry manager to make sure that maintenance is periodically performed. Note! Lack of maintenance may deteriorate the performance of the machine and may cause damage to components. -
Page 16: Water Inlet
User manual Note! Contact qualified service personnel to perform maintenance on the internal drain and hoses once a year. 6.6 Water inlet At regular basis, check the filter at the water inlet. Clean if necessary. Demount the hose to the water inlet and pull out the filter (A). When remounting, make sure the filter is in position and that the connections are tight. -
Page 17: Disposal Information
User manual 7 Disposal information 7.1 Disposal of appliance at end of life Before disposing of the machine, make sure to carefully check its physical condition, and in particular any parts of the structure that can give or break during scrapping. The machine’s parts must be disposed of in a differentiated way, according to their different characteristics (e.g. - Page 20 Electrolux Professional AB 341 80 Ljungby, Sweden Share more of our thinking at www.wascomat.com...
Need help?
Do you have a question about the H7-75 and is the answer not in the manual?
Questions and answers