Table of Contents
Advertisement
INSTRUCTION
HANDBOOK
Locking and tagging procedure
A red insert at the beginning of this instruction handbook schematically shows the locking and
tagging procedure described below. If you wish, you can detach this insert and display it close
to the machine to remind maintenance personnel of the safety instructions.
1
2
3
4
5. Locking and
tagging procedure
Always respect items
2, 3 and 4 carefully
before doing any re-
pair or maintenance
work on the machine.
Put the main switch
to Off and lock the
handle with a padlock
in one of the three
holes provided for
this purpose.
Open the fixed
protectors (casings,
doors) with the key
provided or a special
tool.
Close and carefully
lock the fixed
protectors.
1298
01201055
Notice
Date
Close the stop valves for
the
(steam, gas, thermal
fluid, compressed air)
to stop and lock their
handle with a pad-
lock.
Do the maintenance.
Unlock the stop
valves and the
main switch.
1
5
Page
other
supplies
Hide quick links:
Advertisement
Table of Contents
