Installation - Wascomat WS3 230-340-470-670 H Instruction Handbook Manual

Washer-extractors
Table of Contents

Advertisement

INSTRUCTION
HANDBOOK
You should have found an instruction handbook and keys to open the machine casings, in the
machine.
Depending on its destination, the washer extractor is delivered bare or may be placed on a
transport pallet and/or packed with plastic film.
In some cases, it may be delivered in a crate, or in maritime packing (wood box).
Please refer to the handling chapter in this instruction handbook for a description of handling
operations.
Unpacking
Take off the plastic film or remove the four wood socles with an spanner.
Check that no damage has been caused during transport.

Installation

The installation must be done by competent technicians in accordance with local codes and
regulations. When there are not local codes and regulations, the installation must be comply
with European standards applicable.
The machine must be installed on a perfectly even surface, strong and horizontal, capable
resisting to the efforts shown in the technical characteristics.
Adjustment of the machine by addition of level plate should be avoided.
F Control the horizontal level using a water level placed on the machine's sole.
F Place the washer extractor so that it is easy for the user and the service technician to do
their work.
F Leave at leasy 1 m (40") (according to the recommendation in standard EN 60204)
between the machine, a wall or any other machine at the sides.
9. Installation
40"
water
level
01201055
Notice
40"
0102
1
9
Date
Page
40"
water
level
D0621

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents