2002 Explorer Sport/Sport Trac Workshop Manual
7. Remove the LH valve cover. For additional information, refer to
8. Remove the RH valve cover. For additional information, refer to
9. Disconnect the generator electrical connections.
10. Remove the accessory drive belt tensioner.
11. Remove the bolts and the generator and generator mounting bracket as an assembly.
12. Disconnect the crankshaft position (CKP) sensor electrical connector.
13. Disconnect the wiring harness retainers.
14. Disconnect the water temperature indicator sender unit and the engine coolant temperature (ECT) sensor electrical connectors.
15. Disconnect the exhaust gas recirculation (EGR) tube fitting.
http://www.fordtechservice.dealerconnection.com/pubs/content/~...
Valve Cover — LH
in this section.
Valve Cover — RH
in this section.
Page 2 of 17
1/22/2010