2002 Explorer Sport/Sport Trac Workshop Manual
50. Connect the crankshaft position sensor electrical connector.
51. Position the generator and generator mounting bracket as an assembly and install the bolts.
52. Position the accessory drive belt tensioner and install the bolt.
53. Connect the generator electrical connections.
54. Install the RH valve cover. For additional information, refer to
55. Install the LH valve cover. For additional information, refer to
56. Install the accessory drive belt. For additional information, refer to
57. Install the cooling fan shroud. For additional information, refer to
58. Install the intake manifold. For additional information, refer to
59. Fill and bleed the cooling system. For additional information, refer to
http://www.fordtechservice.dealerconnection.com/pubs/content/~...
Valve Cover — RH
in this section.
Valve Cover — LH
in this section.
Section
303-05.
Section
303-03.
Intake
Manifold.
Section
303-03.
Page 16 of 17
1/22/2010