Tighten The Bolts - Ford Explorer Sport 2002 Workshop Manual

2002 Explorer Sport/Sport Trac Workshop Manual
19. NOTE: The camshaft timing slots are off-center.
Position the camshaft timing slots below the centerline of the camshaft and install the special tools on the front of the RH cylinder head.
20. If necessary, remove the RH fenderwell splash shield.
21. If necessary, remove the RH camshaft chain tensioner.
22. NOTE: Leave the top two special tool clamp bolts loose.
Install the special tools on the rear of the RH cylinder head.
23. Install the special tool in the RH cylinder head.
24. CAUTION: The right hand camshaft sprocket bolt is a left-hand thread bolt.

Tighten the bolts.

1. Tighten the special tool top two clamp bolts to 10 Nm (89 lb-in).
2. Tighten the camshaft sprocket bolt.
http://www.fordtechservice.dealerconnection.com/pubs/content/~...
Page 11 of 17
1/22/2010