2002 Explorer Sport/Sport Trac Workshop Manual
25. Install the RH camshaft chain tensioner.
26. Install the RH fenderwell splash shield.
27. If necessary, remove the LH camshaft chain tensioner.
28. If necessary, loosen the LH camshaft sprocket bolt.
29. NOTE: Leave the top two special tool clamp bolts loose.
Install the special tools on the front of the LH cylinder head.
30. NOTE: The camshaft timing slots are off center.
Position the camshaft timing slots below the centerline of the camshaft and install the special tools on the rear of the LH cylinder head.
http://www.fordtechservice.dealerconnection.com/pubs/content/~...
Page 12 of 17
1/22/2010