Page 1
Short User Manual TANDBERG MXP systems - English Software version F1 D13388.03 June 2006 This document is not to be reproduced in whole or in part without permission in writing from:...
Table of Contents General Use..........................3 The Remote Control....................... 3 The Menu ..........................4 On Screen Indicators ......................5 Handle Calls ..........................6 Make a Call ..........................6 Answer an Incoming Call ....................... 6 End Call..........................7 Phone Book..........................8 Move Camera.........................
TANDBERG Short User manual - 3 General Use The Remote Control The system is controlled with a remote control. Think of the remote control as a mobile or cellular phone with number keys and call keys. Use the arrow keys and OK to navigate the menus.
TANDBERG Short User manual - 4 The Menu When the system is not in use, it is in standby mode. The screens are black. Wake up the system by picking up or pressing any key on the remote control. When the system is switched on, you will see the welcome screen. The welcome screen presents the menu and displays your Main Camera image in the background (Main Camera is system default).
TANDBERG Short User manual - 5 On Screen Indicators The system has a number of icons signalling different settings: Volume Off This indicator is shown when the volume is turned off. Press Volume + to turn the volume back on.
You can enter a number manually in the input field or select the book icon to select a contact from the phone book. The TANDBERG system can place both video calls and telephone calls. For video calls, choose Place Video Call in the call menu. For telephone calls, choose Place Telephone Call.
TANDBERG Short User manual - 7 End Call How to end a call: 1. Press the red End Call key on the remote control or select End Call from the menu. 2. Press once again the red End Call key on the remote control or press the OK-key to confirm that the call is to be ended.
Cancel (X) key and adjust the camera with the arrow keys. Use Camera Presets. Press a number and the camera will move to a predefined position (when you are in a call). Use Automatic Camera Tracking. (See TANDBERG user manual) Use the TANDBERG Tracker. (See separate documentation)
TANDBERG Short User manual - 9 Presentation The Presentation functionality enables you to show PC, DocCam (Document Camera), VCR, AUX and VNC sources in addition to your Main Camera. This is perfect for meetings where you would like to show a PowerPoint presentation for instance. You can even use arrow keys up and down on the remote control to activate Page Up/Down on the PC.
TANDBERG Short User manual - 10 Picture Layouts The Layout key on the remote control has two behaviours depending on the Picture Layout setting in Administrator Settings (see Control Panel - Administrator Settings – General – Screen Settings). It can provide either a Picture in Picture (PIP) or a Picture outside Picture (POP).
Page 11
TANDBERG Short User manual - 11 Picture outside Picture (for wide screens) With Picture outside Picture (POP), pressing the Layout key on the remote control will bring up the different compositions of the pictures that are optimized for wide screens. Picture outside Picture is recommended with wide screen monitor systems.