Table of Contents
Advertisement
2–10
7. Attach the DC terminal covers.
8. Before proceeding, double check that you have connected the cables
properly—positive to positive, negative to negative.
9. Turn on the battery disconnect switch or breaker.
10. If you have installed a battery selector switch, use it to select one of
the batteries or battery banks (house bank preferred over start bank).
11. Turn the inverter's On/Off switch to the On position.
12. Test sample loads by plugging appliances into the AC receptacles and
check to see if they work properly.
Alternatively, if a load sub-panel or additional AC outlets are
hardwired into the inverter AC output, test that appliances plugged
into the additional outlets are working properly.
This guide for use by qualified installers only.
975-0556-01-01
Advertisement
Table of Contents
