Table of Contents
Advertisement
Mounting
Orientation
Figure 1-3 Approved Mounting Orientations
Mounting
Dimensions
91.5 mm
225 mm
(3.6 in.)
(8.9 in.)
Figure 1-4 Mounting Dimensions (Not to scale)
975-0556-01-01
The inverter must be oriented in one of the following ways:
•
Horizontally on a vertical surface. (Do not mount with the fan
pointing up or down.)
•
On a horizontal surface.
•
Under a horizontal surface.
Use the measurements below to plot the holes in the surface where you
want to anchor the inverter and permanently mount it into place.
mounting hole Ø 5 mm (0.2 in.)
This guide for use by qualified installers only.
450 mm (17.7 in.)
Non-sinusoidal
output onl y .
Non seulement de
sortie sinusoïdal e .
REMOTE
RESET
POWER
FAULT
PUISSANCE
FAUTE
126.5 mm
(5 in.)
1–7
Advertisement
Table of Contents
