General Electrical Safety Instructions - Sundance Spas Altamar Owner's Manual

• PROPER VENTILATION: Proper ventilation should be discussed
with an Engineer or authority competent enough to understand the
necessary provisions needed to vent moist or heated air and air asso-
ciated with chemical odors outdoors. When the spa is in use consid-
erable amounts of moisture will escape potentially causing mold and
mildew, over time this can damage certain surfaces and or surround-
ings.
• SUFFICIENT ACCESS: In the unlikely event that you should ever
need to access or gain entry to any portion of the spa for servicing, it
is highly recommended that you plan your indoor installation to pro-
vide full access to the entire spa.
• WARRANTY: Damage caused by not following these guidelines or
any improper installation not in accordance with local codes or au-
thorities is not covered under the spas warranty. Please consult your
local state or city building ordinances.
WARNING: In addition to maintenance of filters and water
chemistry, proper ventilation is recommended to reduce
the risk of exposure to viruses and bacteria that could be
present in the air or water. Consult a licensed architect
or building contractor to determine your specific needs if
installing your hot tub indoors.

4.0 General Electrical Safety Instructions

Your new Sundance® hot tub is equipped with the "state-of-the-art"
™
Sentry equipment system. It contains the most advanced safety and
self-protective equipment in the industry. Nonetheless, this hot tub must
be installed properly to ensure dependable usage. Please contact your
local Sundance dealer or local building department should you have any
questions regarding your installation.
Proper grounding is extremely important. Sundance hot tubs are
equipped with a current collector system. A pressure wire connector is
provided on the surface of the control box, located inside the equipment
door (Figure-C, page 12) to permit connection of a bonding wire between
Page 8