Auto Mode - Sony XCD-SX910CR/X710CR Technical Manual

Before sending a command, check the predetermined
variable range and check whether the feature supports

AUTO mode.

Note that variable ranges for Pan/Tilt differ
Address Data
F0F00500h 8905A073h
(Brightness)
F0F00504h 8905A073h
(AutoExposure)
F0F0050Ch CB003424h
(White Balance)
(XCD-SX910CR/X710CR only)
F0F00510h 8B1803FFh
(Hue)
(XCD-SX910CR/X710CR only)
F0F0051Ch CB003424h
(Shutter)
F0F00520h 8B1803FFh
(Gain)
F0F00530h 8C81C000h
F0F00584h 89 ******
(Pan)
F0F00584h
(Tilt)
F0F0058Ch 8C81C000h
(Optical Filter)
(XCD-SX910CR/X710CR only)
1)
* According to the IEEE 1394 specifications, the most significant bit is shown as 0.
2)
* These feature are to be applied to IIDC v.1.31. Therefore, they may be changed after IIDC v.1.31 is formally approved.
XCD-SX910CR/X710CR
XCD-SX910/X710
considerably depending on the video mode. After
switching video mode, check the variable range of the
new video mode.
1)
Bit*
0 This feature exists.
4 The value can be read out.
7 Manual setting can be selected.
8-19 Min. 0
20-31 Max. 63
0 This feature exists.
4 The value can be read out.
7 Manual setting can be selected.
8-19 Min. 90
20-31 Max. 115
0 This feature exists.
4 The value can be read out.
7 Manual setting can be selected.
8-19 Min. 0
20-31 Max. 127
0 This feature exists.
4 The value can be read out.
7 Manual setting can be selected.
8-19 Min. 0
20-31 Max. 63
0 This feature exists.
1 Absolute value control possible
4 The value can be read out.
6 Auto setting can be selected.
7 Manual setting can be selected.
8-19 Min. 3
20-31 Max. 1060
0 This feature exists.
4 The value can be read out.
6 Auto setting can be selected.
7 Manual setting can be selected.
8-19 Min. 384
20-31 Max. 1023
0 This feature exists.
4 The value can be read out.
5 Feature can be switched between ON and OFF.
8 Trigger Source0 exists.*
15 Software Trigger Mode exists.*
16 Trigger Mode0 exists.
17 Trigger Mode1 exists.
0 This feature exists.
4 The value can be read out.
7 Manual setting can be selected.
8-19 Min. (Depends on the video mode.)
20-31 Max. (Depends on the video mode.)
0 This feature exists.
4 The value can be read out.
7 Manual setting can be selected.
8-19 Min. 0
20-31 Max. 3
2)
2)
Control
23