Binning Mode; Format7 Mode3/4 For Xcd-Sx910Cr/Sx910 - Sony XCD-SX910CR/X710CR Technical Manual

Binning Mode

The mode used when the sensitivity is increased and
the frame rate is multiplied based on mixing the CCD
pixel data, is called the Binning mode.
There are two types of binning: 1 × 2 binning when the
output image is compressed in the vertical direction
only, and 2 × 2 binning when the image is compressed
in the horizontal direction also.
When binning mode is used, set either Format7 Mode
1 (2 × 2 binning), or Format7 Mode 2 (1 × 2 binning).
The specifications for each model are given below.
XCD-SX910
640 × 480
Format7Mode1
(2 × 2 binning)
Mono8
Mono16
1280 × 480
Format7Mode2
(1 × 2 binning)
Mono8
Mono16
Partial scan is not available in Binning Mode.
Be careful. If the exposure time is set slower than the
frame rate in the shutter setting, the frame rate may
also drop with respect to the exposure time.
Format7 Mode3/4 for
XCD-SX910CR/SX910
Only the XCD-SX910CR/SX910 supports Format7,
Mode3 and Mode4.
XCD-SX910CR/SX910
1376 × 1024
Format7Mode3
Mono8
Mono16
1024 × 1024
Format7Mode4
Mono8
Mono16
Partial scan is not available in these modes.
XCD-SX910CR/X710CR
XCD-SX910/X710
XCD-X710
512 × 384
30/15 fps Mono8 50/25 fps
15/7.5 fps Mono16 25/12.5 fps
1024 × 384
30/15 fps Mono8 50/25 fps
15/7.5 fps Mono16 25/12.5 fps
15/7.5 fps
7.5/3.75 fps
15/7.5 fps
7.5/3.75 fps
Functions
12