Table of Contents
Advertisement
L. Display reads "dSFL," dryer sensor circuit failure...
1. Check 1/8 amp fuse on computer.
2. Faulty microprocessor temperature sensor probe.
3. Open circuit in either one (1) of two (2) wires leading from the sensor probe to the computer.
a. Connection at sensor bracket assembly connector.
b. Connection at computer harness connector.
4. Faulty microprocessor controller (computer).
M. Dryer does not start. Display reads "door"...
1. Main door is open.
2. Lint drawer is open.
3. Faulty main door or lint door switch.
4. Open circuit in either main door or lint drawer switch harnesses.
5. Faulty 24V transformer.
N. There is excessive vibration coming from the basket (tumbler)...
1. Basket (tumbler) is out of adjustment.
2. Loose or broken tie rod.
3. Failed basket (tumbler) support.
40
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the AD-81 and is the answer not in the manual?