Rear Seat - Triumph Tiger Explorer Owner's Handbook Manual

Triumph tiger explorer motorcycle owner's handbook
Hide thumbs Also See for Tiger Explorer:
Table of Contents

Advertisement

Rear Seat

1
chdg
1. Seat lock
The seat lock is located on the rear fender,
below the brake/tail light unit. To remove the
seat, insert the ignition key into the seat lock
and turn it counter-clockwise while pressing
down on the rear of the seat. This will release
the seat from its lock and allow it to be slid
rearwards for complete removal from the
motorcycle.
General Information
To re-install the seat, engage the seat's two
outer brackets under the loops on the
subframe and the two inner brackets to
brackets on the rider's seat. Gently push the
seat forwards and press down at the rear to
engage in the seat lock.
3
1
4
chdj
1. Rear seat outer brackets
2. Subframe loops
3. Rear seat inner brackets
4. Rider seat brackets
Warning
To prevent detachment of the seat during
riding, after installing always grasp the seat
and pull firmly upwards. If the seat is not
correctly secured, it will detach from the
lock. A loose or detached seat could cause
loss of motorcycle control and an accident.
1
2
61

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents