Abs Disable; Return - Triumph Tiger Explorer Owner's Handbook Manual

General Information

ABS Disable

It is possible to temporarily disable the ABS
system. The ABS system
permanently disabled, it will be automatically
enabled when the ignition is turned off and
then on again.
Warning
If the ABS is disabled, the brake system will
function as a non-ABS braking system. In
this situation braking too hard will cause
the wheels to lock, and may result in loss of
motorcycle control and an accident.
To Disable the ABS
To access the ABS Disable function; with the
motorcycle stationary and in neutral, turn the
ignition to the ON position.
Press and release the set button on the left
hand switch cube until 'SEtUP' is visible in the
display screen.
Press and release the scroll button until AbS
is visible.
Press the set button and 'on' or 'oFF' will be
displayed.
Press and release the scroll button until 'oFF'
is visible in the display screen.
Pressing the set button will disable the ABS
system; the message ABS OFF will be
displayed for 2 seconds, and the ABS
warning light will be illuminated.
Note:
• With the ABS
traction control will still function.
34
To Enable the ABS
To enable the ABS system again, repeat the
ABS disable procedure and select 'on'.
cannot be
Press the home button and the odometer in
the trip 1 menu will be visible in the display
screen.
An alternative way to enable the ABS is to
turn the ignition off and on.

Return

When return is displayed and the set button
is pressed, trip 1 menu will be visible in the
display screen.
disabled, the