Clutch; Clutch Fluid Level Inspection And Adjustment - Triumph Tiger Explorer Owner's Handbook Manual

Clutch

The motorcycle is equipped
hydraulically operated clutch that does not
require adjustment.
Clutch Fluid Level Inspection and
Adjustment
Warning
Use only DOT 4 specification brake and
clutch fluid as listed in the specification
section of this handbook. The use of brake
and clutch fluids other than those DOT 4
fluids listed in the specification section may
reduce the efficiency of the clutch system
leading to an accident.
Failure to change the brake and clutch fluid
at the interval specified in the scheduled
maintenance chart may reduce clutch
efficiency resulting in an accident.
Inspect the level of brake and clutch fluid in
the reservoir and change the fluid in
accordance with the scheduled maintenance
requirements. Use only DOT 4 fluid as
recommended in the specification section.
The brake and clutch fluid must also be
changed if it becomes, or is suspected of
having become contaminated with moisture
or any other contaminates.
The brake and clutch fluid in the reservoir
must be kept between the upper and lower
level lines (reservoir held horizontal).
Loosen the screws securing the clutch
reservoir cover, then remove the cover noting
the position of the diaphragm seal.
Fill the reservoir to the upper level line using
new DOT 4 fluid from a sealed container.
Maintenance and Adjustment
Install the reservoir cover ensuring that the
diaphragm seal is correctly installed. Tighten
with a
the screws to 9 lb in (1 Nm).
1
2
3
4
5
chgv
1. Screws
2. Cover
3. Diaphragm seal
4. Upper level line
5. Lower level line
1
101