Related Manuals for Lincat OE7013
Summary of Contents for Lincat OE7013
- Page 1 User and Installation Instructions Opus Induction Hobs OE7013 & OE7014 IS430:ECN3559...
-
Page 2: Installation
Please read these instructions carefully before using this equipment. Keep them in a safe place for future reference. All Lincat electrical appliances must be installed, operated and serviced by a competent person. Users should take care to adopt safe working practices when operating or cleaning appliances. Please contact your local distributor for further advice. -
Page 3: User Maintenance
Users with heart pacemakers should consult with the manufacturer of the pacemaker or their doctor. USER MAINTENANCE Before working on or cleaning the equipment, isolate it from the power supply and allow it to cool to a safe working temperature. Clean units regularly with hot water and detergent, do not use abrasive or chlorine based cleaners on stainless steel. - Page 4 There are numerous “E” symbol error codes, these identify issues within the induction system and are primarily of use when reporting a fault to the Service department at Lincat Ltd. Some errors can be cleared by turning the control to the “off” position, or completely turning off and unplugging the unit, before switching on again.
- Page 5 Pull the latch as shown (1), this will allow the filter cover to be lifted away from the base panel (2). Remove the filter and clean - the filter may be put in a dishwasher. Replace the clean filter into the base panel ensuring that the latch has fully re-engaged. Reconnect to the power supply.
- Page 6 INDUCTION HOB SPECIFICATIONS Model OE7013 OE7014 External height (mm) External width (mm) External depth (mm) Net weight 23.5 kg 42 kg 2 zones 4 zones Hob surface 6mm thick Schott Ceran® ceramic 6mm thick Schott Ceran® glass ceramic glass Electrical supply 1N~+E...
- Page 7 OE7014 INDUCTION HOB SPARES Description Part Code Replacement air filter OA7956 Control knob KN268 Green neon NE39 Adjustable Leg LE38 IS430:ECN3559...
-
Page 8: Service Information
Please quote both the model and serial numbers from the data plate attached to the unit. Give brief details of the service requirement. Lincat reserve the right to carry out any work under warranty during normal working hours, i.e. Monday to Friday, 8.30 a.m. - 5.00 p.m.