Machine Status Messages - Brother HL-4140CN User Manual

Control Panel

Machine status messages

The following table shows the machine status messages during normal operation:
Machine Status Message
Cooling Down
Job Cancel
Job Cancel (All)
Ignore Data
Pause
Please Wait
Printing
Ready
Sleep
1
Deep Sleep
1
(HL-4570CDW(T) only) When the Wireless Network is enabled the machine does not transfer to Deep Sleep mode. If you want to disable the
Wireless Network, change setting of the WLAN Enable to Off. (See Network for HL-4570CDW(T) users on page 77.)
Meaning
The machine is cooling down.
Canceling the job.
Machine is ignoring data processed using the PS driver.
The machine has suspended its operations. Press Go to start the machine
again.
The machine is warming up.
The machine is carrying out the calibration process.
Printing.
Ready to print.
In sleep mode (power save mode). The machine acts as though it were
turned off.
In Deep Sleep mode (reducing more power consumption than Sleep mode).
The machine acts as though it were turned off. If the machine does not
receive data for a certain length of time while it is in Sleep mode, it enters
Deep Sleep mode automatically.
3
3
68