Brother HL-4140CN User Manual page 60

Driver and Software
Print Quality

You can choose the following print quality settings.
• Normal (600 x 600 dpi)
600 dpi class. Recommended for ordinary printing. Good print quality with good print speed.
• Fine (2400 dpi class)
2400 dpi class. The finest print mode. Use this mode to print precise images such as photographs.
Since the print data is much larger than in normal mode, processing time, data transfer time, and
printing time will be longer.
Note
The print speed will change depending on what print quality setting you choose. Higher print quality takes
longer to print, while lower print quality takes less time to print.
 Color / Mono
You can change the Color/Mono settings as follows:
• Auto
The machine checks the content of your documents for colour. If colour is detected, it prints in colour.
If no colour content is detected, it prints in monochrome. The total printing speed may become slower.
• Color
When your document contains colour and you want to print it in colour, select this mode.
• Mono
Select this mode if your document has only black and greyscale text and/or objects. Mono mode makes
the print processing speed faster than colour mode. If your document contains colour, selecting Mono
mode prints your document in 256 levels of grey.
Note
• Sometimes a document can contain colour information even if it appears to be monochrome (for example,
grey areas can actually be made from a combination of colours).
• If either the Cyan, Magenta or Yellow toner reaches the end of its life while printing a colour document, the
print job cannot be completed. You can choose to start the print job again in Mono mode, as long as black
toner is available.
 Toner Save Mode
You can conserve toner use with this feature. When you set Toner Save Mode to On, print appears lighter.
The default setting is Off.
Note
We do not recommend Toner Save for printing Photo or greyscale images.
 Paper Source
You can choose Auto Select, Tray 1, Tray 2, MP Tray or Manual.
2
55