Led Indications; Machine Status Messages - Brother HL-3140CW User Manual

General Information

LED indications

The LEDs are lights that show the machine's status.
Data LED (Green)
LED indication
On
Blinking
Off
Error LED (Orange)
LED indication
Blinking
Off

Machine status messages

The following table shows the machine's status messages during normal operation:
Machine Status Message
Cooling Down
Cancel Printing
Cancel All Jobs
Calibrate
Ignore Data
Pause
Please Wait
Printing
Ready
Sleep
Deep Sleep
Registration
Meaning
Data is in the machine's memory.
The machine is receiving or processing data.
There is no remaining data in the memory.
Meaning
There is a problem with the machine.
There is no problem with the machine.
Meaning
The machine is cooling down.
The machine is canceling the job.
The machine is calibrating the colour density.
The machine is ignoring data processed using the PS driver.
The machine has suspended its operations. Press Go to start the machine
again.
The machine is warming up.
The machine is carrying out the calibration process.
The machine is printing.
The machine is ready to print.
In Sleep mode (power save mode) the machine acts as though it were turned
off, but the machine can still receive data. Receiving a print job will wake up
the machine to start printing.
In Deep Sleep mode (reducing more power consumption than Sleep mode),
the machine acts as though it were turned off. If the machine does not receive
data for a certain length of time while it is in Sleep mode, it enters Deep Sleep
mode. The machine will wake up when the machine receives a print job.
The machine is adjusting the print position.
3
3
3
3
3
83