Brother HL-4140CN User Manual page 80

Control Panel
Print Menu (continued)
Submenu
HP LaserJet
BR-Script 3
The factory settings are shown in Bold with an asterisk.
Menu Selections Options
Font No. I000.../I059*.../I071
Font Pitch 0.44/10*.../99.99
Font Point 4.00/12*.../999.75
Symbol Set PC-8*...
Table Print
Auto LF
Off*/On
Auto CR Off*/On
Auto WRAP Off*/On
Auto SKIP
On*/Off
Left Margin ##
Right Margin ##
Top Margin #.##
Bottom Margin #.##
Lines ###
Error Print On*/Off
CAPT Off*/On
Descriptions
Sets the symbol set or the character
set.
Prints code table.
If Change Emulation appears on
the LCD, choose Auto or
HP LaserJet in Emulation of
Print Menu.
(See page 74.)
ON: CR i CR+LF, OFF: CR i CR
ON: LF i LF+CR, FF i FF+CR, or
VT i VT+CR
OFF: LF i LF, FF i FF, or VT i VT
Chooses whether a line feed and
carriage return will happen when the
machine reaches the right margin.
Chooses whether a line feed and
carriage return will happen when the
machine position reaches the bottom
margin.
Sets the left margin at column 0 to 70
columns at 10 cpi.
Sets the right margin at column 10 to
80 columns at 10 cpi.
Sets the top margin at a distance
from the top edge of the paper: 0,
0.33, 0.5, 1.0, 1.5 or 2.0 inches. The
default setting is 0.5 inches.
Sets the bottom margin at a distance
from the bottom edge of the paper: 0,
0.33, 0.5, 1.0, 1.5 or 2.0 inches. The
default setting is 0.5 inches.
Sets the number of lines on each
page from 5 to 128 lines.
3
75