Heartway Medical Products BIEN S15 User Manual page 25

15:Buttons
ITEM SPECIFICATION
Button
Left-Hand: MODE Button
General Display Mode
(TRIP)
Setting Mode
Escape from Setting
Mode
Operation Status
Remarks
Press SET for 3 seconds to reset TRIP at "00.0".
Press MODE and SET simultaneously for more than 2 seconds. to enter "Setting
Mode", then 『Hour：MIN』start flashing.
(1) When『Hour』flashing:
Press SET to increase of number, then press
『MIN』.
(2) When『MIN』flashing:
Press SET to increase of number, then press
『km/h & mph』.
(3) When 『km/h』 or 『mph』flashing
Press SET to choose "km/h" or "mph" type, then press .MODE
Mode" of 『°C / °F』
(4) When『°C』or『°F』flashing
SET to choose °C or °F .
Press
Under setting mode, if below situations happened, will auto save the last setting value then
escape to general operation mode.
(1) No any operation of ADJ button for 20 sec.
(2) Press MODE and SET
(1) 『Hour：Min』,『km/h』or『mph』,『°C』or『°F』offer Cyclical Switch function.
(2) When adjusting 『Hour：Min』, press
more than 2 seconds, the number will increase continuously until button released, setting
value with Cyclical Switch function (only 2 seconds from 0 to 9).
* If『Hour』less than 10, the denary "0" doesn't display.。
Button tones: one short "Bi" sound
Right-Hand: SET Button
MODE
MODE
at same time for more than 2 sec.
SET to increase number, if press
25
to enter "Setting Mode" of
to enter "Setting Mode" of
to enter "Setting
SET for
25