Heartway Medical Products BIEN S15 User Manual page 16

Operating Instruction
1.Speed Sensor and Display
ITEM
Operation Features
Tolerance
Digital Range
Display Switch Button
2.High /Low Speed Setting
ITEM
Operation Features
(1) Trigger buttons to switch from high-speed to low-speed (also from low-speed to
high-speed), then set the number of segments from 1 to 5 .The setting time will take 5
seconds for each segment.
(2) L will flash while turning at corner.
(3) As a constant speed detector to determine the signal, the speed light will flash while
travelling at constant speed.
Symbols on LCD
Flicker Frequency
Speed detection by speed hall sensor from transaxle with conversion at 1821 rpm equal to
Initial setting at km/h, switch to MPH by MODE
＂H＂symbol means "High Speed" –Corresponding from 1-5
＂L＂symbol means "Low Speed" – Corresponding from 1-5
＂L＂symbol flashing means "Turning at the corner"
SPECIFICATION
60km/h.
5~15% (±2%)
0~199 km/0~124 mile
SPECIFICATION
1 sec
16
and SET buttons
16