Welcome; Phone Features; Requirements - Aastra 6731i Installation Manual

Welcome

Congratulations on your purchase of the Model 6731i IP Phone! The 6731i communicates over an IP Network,
allowing you to receive and place calls in the same manner as a regular business telephone. The 6731i IP Phone
is capable of supporting the SIP protocol.

Phone Features

• 3-line LCD screen
• Built-in-two-port, 10/100/1000 Gigabit Ethernet switch - lets you share a connection with your computer
• 8 programmable top keys (4 Pre-configured functions: Save, Delete, Directory , Services)
• Press-and-hold speeddial key configuration feature
• Supports up to 6 call lines with LEDs
• Full-duplex speakerphone for handsfree calls
• Headset mode suppot (via handset jack)
• AC power adapter (sold separately)
• Enhanced busy lamp fields*
• Set paging*
*Availability of feature dependant on your phone system or service provider.

Requirements

• SIP-based IP PBX system or network installed and running with a SIP account created for the 6731i phone.
• Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext Transfer Protocol (HTTP) server,
or Hyper Text Transfer Protocol over Secure Sockets Layer (SSL) (HTTPS).
• Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN (1000 Mbps) recommended)
• Category 5/5e straight through cabling (category 6 straight through cabling required for optimum Gigabit Ethernet
performance).
• Power source.
For Ethernet networks that supply in-line power to the phone (IEEE 802.3af ):
– For power, use the Ethernet cable (supplied) to connect from thephone directly to the network for power. (No 48v
AC power adapter required if using Power-over-Ethernet.)
For Ethernet networks that DO NOT supply power to the phone:
– For power, use the 48V AC Power Adapter (limited power source (LPS) power supply, Input rated 100-240Vac. 50-
60Hz, 0.6A. Output rated 48Vdc, 0.31A min, included only in specific Aastra ordering SKUs) to connect from the DC
power port on the phone to a power source.
or
– (optional) - For power, use a Power over Ethernet (PoE) power injector or a PoE switch. A PoE power injector is avail-
able as an optional accessory from Aastra Telecom. Contact your Administrator for more information.
1
41-001266-06 REV02 – 04.2012