Macintosh Systems - Kodak Digital science 8650 PS User Manual

Appendix C: About SCSI Connection
C-2
Instructions for installation are included in the
Adaptec EZ-SCSI for DOS/Windows, User's Manual.
Make sure that you select the option "Install ASPI" for
Windows and follow the instructions on the screen
for that installation option.

Macintosh Systems

To connect the 8650 color printer directly to your
Macintosh computer (or to daisy-chain the printer with an
external SCSI device), perform the following steps.
IMPORTANT: If you are using a Macintosh IIfx computer,
you must install a special terminator
provided by Apple Computer or
unpredictable results can occur.
1. Set the SCSI device number using the printer's
display panel.
The printer is set at the factory for SCSI ID 5. If you
need to change the SCSI ID, refer to the KODAK
Digital Science 8650/8650 PS Color Printer, User's
Guide for instructions about setting the SCSI device
number.
2. Turn off all equipment before plugging or unplugging
equipment on the SCSI bus.
3. Attach a SCSI cable appropriate to your equipment's
configuration.
4. Attach the SCSI terminator.
NOTE: Some equipment is internally terminated. If
you have questions, refer to your equipment
documentation.
5. Turn on the printer and the computer.
September 1997