Kodak Digital science 8650 PS User Manual page 9

Hardware and Software Requirements
2-2
Requirements for SCSI-Connected Installations
•
An ADAPTEC SCSI host adapter board
NOTE: Kodak tested the AHA 1542 and 2940 boards.
Other cards may work but have not been tested.
•
A SCSI cable
•
A SCSI terminator
•
ADAPTEC EZ–SCSI Software. This software is
commonly provided with ADAPTEC SCSI host
adapter boards when they are purchased. The
supplier of your board should be able to provide the
software if you do not have it, or you can purchase it
through Adaptec directly.
NOTE: Windows 3.1x requires EZ-SCSI 3.0 or above.
Windows 95 and Windows NT 3.51 and 4.0
require EZ-SCSI 4.01b.
Refer to Appendix C: "About SCSI Connection," for more
information.
September 1997