Ford Electric Ranger 1998 Student Manual page 142

LESSON 4: SPECIAL SERVICE TOOLS AND PROCEDURES
4-10
104-Pin Breakout Box (BOB) and BCM/TIM
Breakout Box Adapter Cable and Overlay
BCM/TIM Breakout Box Adapter Cable
A1 A2 A3
A16
A14 A15
A27 A28 A29 A30
A40 B1 B2
B13 B14 B15 B16
Breakout Box (BOB) Overlay
•
The breakout box (BOB) is used in the same manner on the
Ranger EV as on conventional vehicles.
•
When it is used on the Interface adapter assembly (IAA) module,
no adapter cable or overlay is required.
•
When using the BOB for battery control module (BCM)/traction
inverter module (TIM) diagnostics, the, BCM/TIM Breakout Box
Adapter Cable and Overlay are required.
•
It is utilized when performing low-voltage diagnostics on the
BCM or TIM.
A4 A5 A6 A7 A8 A9 A10 A11
A17 A18 A19 A20 A21 A22 A23 A24
A31 A32 A33 A34 A35 A36 A37
B3 B4 B5 B6 B7 B8 B9 B10
B17 B18 B19 B20 B21 B22 B23
1998 Ranger EV New Model Training
ER143-A
A12 A13
A25 A26
A38 A39
B11 B12
B24
ER144-A