Ford Electric Ranger 1998 Student Manual page 106

LESSON 2: VEHICLE OPERATION
2-36
Charging Procedure
Connecting Charging Cord
1. Place the front of the vehicle within 3 m (10 ft) of the charging
station.
2. Place the gear selector in Park (P) and set the parking brake.
3. Turn the key to the OFF position and remove the key.
4. Pull open the charge inlet access door.
5. Align the charge cord plug with the charge inlet and fully insert
the plug (A). Rotate down (B).
6. Push the charging station START button. Battery charging
will begin when the self tests are completed and the green
START light illuminates steadily.
NOTE: If the green charging light goes out and the amber charge
interrupt light illuminates, press the STOP button (the light will turn
off). Try to initiate the charging procedure again.
To Stop Charging
1. Push the STOP button on the charging station.
2. Depress the thumb button on the plug and disconnect the charge
cord plug from the charge inlet.
3. Close the charge inlet access door.
1998 Ranger EV New Model Training