ACTIVITY 2 – VEHICLE FAMILIARIZATION – WORKSHEET F
OBJECTIVE:
To describe various functions and indications of the gauges and instrument panel lights on the
Electric Ranger.
DIRECTIONS: Select the correct answer for each question.
1. Which of the following is not a step in the battery charging procedure?
A. Place the gear selector in Park (P) position and set the parking brake.
B. Turn the driver key to the ON position.
C. Pull open the charge inlet access door.
D. Align the charge cord plug with the charge inlet and fully insert the plug.
E. Push the charging station START button.
2. The needle on the gauge identified by a car icon is pointing towards ON. What does this indicate?
A. The traction battery is charging.
B. The driver key in the ACC position.
C. The 12-volt battery is charging.
D. The motor is enabled.
3. Which gauge can be overlooked when the CHECK GAUGE Warning Lamp illuminates?
A. ECON Gauge.
B. DISTANCE TO EMPTY Gauge.
C. Battery State of Charge Gauge.
D. Temperature Gauge.
4. Which component can move the needle of the Temperature Gauge to the "cold" area?
A. TIM.
B. DC/DC converter.
C. Traction battery.
D. Evaporator core.
5. Which of the following affect(s) the ECON Gauge?
A. Drivetrain power expenditure.
B. Climate control usage.
C. Regenerative braking.
D. All of the above.
1998 Ranger EV New Model Training
INSTRUMENT GAUGES AND LIGHTS
STUDENT ANSWER SHEET
WORKSHEET F CONTINUED ON NEXT PAGE
LESSON 2: VEHICLE OPERATION
2-41