Power Up / Down - Red Epic Epic-M Operation Manual

3. Select the desired camera and press the Enter button. The REDmote will display "Connecting".
4. The REDmote will connect to the camera and display the cameras current settings and status. The
wireless connection will be shown in the lower Right corner of the REDmote screen.

POWER UP / DOWN

Located on the upper right side of the REDmote is the Power / Lock Switch (refer to CONTROLS).
POWER UP
CONNECTED TO CAMERA
If the REDmote is physically attached to a camera, when the camera is powered UP the REDmote will
automatically power UP along with the camera.
NOT CONNECTED TO CAMERA
To manually power UP the REDmote, depress and hold the Power / Lock Switch in the Down direction
for 2 seconds then release.
174 174
©2011 RED.COM INC.
Version 1.7.10
NOVEMBER 17, 2011