Maintenance; Upgrading Redmote Firmware - Red Epic Epic-M Operation Manual

MAINTENANCE

UPGRADING REDMOTE FIRMWARE

The REDmote Update program allows you to upgrade the firmware on your REDmote.
NOTE: Once firmware is upgraded (on REDmote or camera) the REDmote must be paired to the
camera again.
IMPORTANT: After upgrading your REDmote firmware to v1.0.13, you CANNOT roll back the
firmware to lower than v771.
SETUP
CONFIGURING REDMOTE CONNECTION WITH COMPUTER
The first step in upgrading REDmote firmware is to establish communication between the MAC and the
REDmote.
1. Connect a USB to mini-USB cable between the computer and the USB connector on the REDmote.
2. Go to System Preferences and choose Network. This may open automatically when the REDmote is
connected.
3. Look for a device called RNDIS/ ...Gadget.
Version 1.7.10
177
NOVEMBER 17, 2011 ©2011 RED.COM INC.