STOPS
To adjust the STOPS parameter, select the Stops box and use the UP / DOWN arrows to adjust.
Range is 1 to 6.
Default is 2.
FOCUS MENU
IMPORTANT: Auto Focus IS NOT enabled at this time.
The Focus Menu is used to enable and select Focus parameters including MODE and ZONES.
MODE
To adjust the MODE parameter, select the Menu box and use the UP / DOWN arrows to adjust.
Available options are MANUAL and CONFIRM. Default is MANUAL.
CONFIRM places a single circle or a grid of boxes on the screen (depending on the ZONES selection)
that indicate where the image is in focus.
Version 1.7.10
66
66
©2011 RED.COM INC.
NOVEMBER 17, 2011