Power Up - Red Epic Epic-M Operation Manual

•
RED BRICK® 140Wh batteries may be used with Backpack Quickplate, RED Quickplate, Battery Belt
Clip, or RED Cradle via 2B-to-1B Power Adapter Cable P/N 790-0138.
•
4-pin XLR DC power sources may be used with the camera via adaptor cable P/N 790-0164.

POWER UP

Locate the camera's Power / Record button on the right face of the Brain.
NOTE: This button also serves as a Record Start / Stop button once the camera is powered up.
A
When an appropriate power source is connected to the Brain, the Power Status LED will illuminate Red. If
it is illuminated, depress and then release the Power / Record button. The Power Status LED will initially
go out and within 5 seconds illuminate Orange to confirm the camera is powering up, then it will illuminate
Green, confirming the camera is powered up and ready to use.
32 32
A
B
C
A
Power Status LED
B Power / Record Button
C
Media Status LED
Figure 16: Power / Record Button / Status LEDs
©2011 RED.COM INC.
Version 1.7.10
NOVEMBER 17, 2011